press fit मीनिंग इन हिंदी

उदाहरण वाक्य

1. Press fit is achieved with presses that can press the parts together with very large amounts of force.
2. The three parts press fit together with a jaw from each hub fitted alternately with the lobes of the spider.
3. An "'arbor press "'is a small hand operated bearings and other press fit work.
4. Because of the " press fit " needed to hold the bearings, tighter and more precise machining tolerances are needed.
5. Drill bushings can generally be classified as : " press fit " bushings or " renewable " bushings.
6. Press fit and swaged captive nuts are used in panels that are too thin to be threaded or in soft materials that are too weak to be threaded.
7. Sleeve is required to be minimum . 125 inch minimum thick x two inches wide sleeve machined for press fit of . 750 I . D . or . 875 I . D . monoball assembly.
8. An " Interference Fit ", also known as a " Press Fit " or " Friction Fit ", is a fastening between two parts which is achieved by friction after the parts are pushed together, rather than by any other means of fastening.
9. The intent is usually that the feature in question ( such as holes not yet drilled, or paint not yet sprayed ) will be added at a higher assembly level; or that maintenance workers in the field will choose from a kit of undersize and oversize parts ( such as bushings ) in order to achieve a certain fit ( sliding fit, light press fit, etc . ).